BITS Pilani

  • Page last updated on Monday, January 16, 2023

You are here:

Publications

banner
Publications

International Journals

  • Sujan Yenuganti, Uma Gandhi, Umapathy Mangalanathan, “Piezoelectric micro-resonant pressure sensor using Aluminium nitride”, Journal of  Micro/Nanolithography, MEMS, and MOEMS, Vol. 16 (2), pp: 024501-10, 2017.
  • Y. Sujan, G. Uma, M. Umapathy, “Design and testing of piezoelectric resonant pressure sensor”, Sensors and Actuators: A Physical, Vol. 250, pp: 177-186, 2016.
  • Y. Sujan, G. Uma, M. Umapathy, “Design and modeling of a micro-resonant pressure sensor”, Microsystem Technologies, Vol. 23(5), pp: 1285-1293, 2017.
  • Y. Sujan, G. Uma, M. Umapathy, “Micro pressure sensor with three degrees of freedom resonator”, Microsystem Technologies journal, Springer publications, Vol. 23(8), pp: 3201-3214, 2017.
  • Thanh Tuong Pham, Haifeng Zhang, Sujan Yenuganti, Suresh Kaluvan, and John A Kosinski, “Design, modeling and experimentation of a piezoelectric pressure sensor based on a thickness shear mode crystal resonator”, IEEE Transactions on Industrial Electronics, Vol. 64(11), pp: 8484-8491, 2017. 
  • Sujan Yenuganti, Haifeng Zhang and Chen Zhang, “Langasite crystal based pressure sensor with temperature compensation”, Sensors and Actuators: A Physical, Vol. 281, pp: 108-116, 2018.
  • Chen Zhang, Sanford H Siegel, Yenuganti Sujan and Haifeng Zhang, "Sensitivity analysis of piezo-driven stepped cantilever beams for simultaneous viscosity and density measurement", Smart Materials and Structures journal,Vol. 28(6), pp: 1-11, 2019. 
  • Sujan Yenuganti, Chen Zhang and Haifeng Zhang, "Quartz crystal micro balance for viscosity measurement with temperature self compensation", Mechatronics, Vol. 59, pp: 189-198, 2019. 
  • Sohrab Mirzaabedeni, Haifeng Zhang and Sujan Yenuganti, "Analysis of angular position, dimension and material of a cantilever piezoelectric energy harvester", Ferroelectrics, Vol. 537(1), pp: 1-19, 2018. 
  • Sankalp Paliwal and Sujan Yenuganti, "Design and simulation of  digital output MEMS pressure sensor", Arabian Journal for Science and Engineering, Vol. 45, pp: 6661-6673, 2020. 
  • Sujan Yenuganti and P Mythili, "Improved energy harvesting from a clamped-clamped micro beam with cavity", Microsystem Technologies, Vol. 27, pp: 2773-2783, 2021.
  • Sankalp Paliwal and Sujan Yenuganti, "A differential hall effect based pressure sensor", Journal Electrical Engineering and Technology, Vol. 16, pp: 1119-1129, 2021.
  • N Naren, Vinay Chamola, Sainath Bitrgunta, Ananthakrishna Chintanpalli, Puneet Mishra, Sujan Yenuganti and Mohsen Guizani, "IoMT and DNN enabled drone assisted covid-19 screening and detection frame work for rural areas", IEEE Internet of Things Magazine, Vol. 4(2), pp: 4-9, 2021. 
  • Sankalp Paliwal and Sujan yenuganti, "Fabrication and testing of hall effect based pressure sensor", Sensor Review, Vol. 42 (3), pp: 354-364, 2022.
  • P Pandiyan, Y Sujan, S Srinivasulu Raju, "Design and simulation of piezoelectric MEMS logic gates", Ferroelectrics, Vol. 602(1), pp: 105-120, 2023. 
  • S Yenuganti, S Paliwal and P Mythili, "Non-contact thickness measurement system using a smart cantilever beam", Experimental Techniques, 2022. https://doi.org/10.1007/s40799-022-00621-1.

International Conferences

  • Y Sujan, B Vasuki, G Uma, M Umapathy, S Harihara Krishnan, “Sensitivity Enhancement of Surface Micromachined Resonant Pressure Sensor”, in proceedings of 6th International Conference on Smart Materials Structures and Systems (ISSS-2012), January 04-07, 2012, IISc, Bangalore, India.
  • Y Sujan, B Vasuki and G Uma, “T-Shaped Resonating Beam Pressure Sensor”, in proceedings of 10th  IEEE International Conference on Semiconductor Electronics (ICSE-2012), September 19-21, 2012, kualalampur, Malaysia.
  • Y Sujan, B Vasuki, G Uma, D Ezhilarasi, K Suresh, “Thickness sensor for Ferromagnetic sheets”, in proceedings of 6th IEEE International Conference on Sensing Technology (ICST-2012), December 18-21, 2012, Kolkata, India.
  • M Umapathy, Y Sujan and K Suresh, “Piezoelectric based Resonance Displacement sensor”, in proceedings of IEEE Sensors Applications Symposium (SAS-2013), February 19-21, 2013, Galveston, Texas, USA.
  • S Sathiya, B Vasuki and Y Sujan, “Flow rate enhancement foe resonance based liquid pump with 2 DOF resonators”, in proceedings of 7th International Conference on Smart Materials Structures and Systems (ISSS-2014), July 8-11, 2014, IISc, Bangalore, India.
  • Pankaj Shivhare, G Uma, Y Sujan and M. Umapathy, “Sensitivity Improvement of a Silicon Nitride Beam Resonant Pressure Sensor”, in proceedings of International Conference on  MEMS  and  Sensors (ICMEMSS 2014), December 18-20, 2014, Indian  Institute  of  Technology  Madras,  Chennai, India.
  • P Pandiyan, G Uma, M. Umapathy and Y Sujan, “Design and Simulation of Chevron type MEMS Digital to Analog Converters”, in proceedings of International Conference on  MEMS  and  Sensors (ICMEMSS 2014), December 18-20, 2014, Indian  Institute  of  Technology  Madras,  Chennai, India.
  • S Harihara Krishnan, D Ezhilarasi, G Uma, M Umapathy, and Y Sujan , “Enhancement of vertical displacement in Electro thermal micro actuator”, in proceedings of 6th International Conference on Smart Materials Structures and Systems (ISSS-2012), January 04-07, 2012, IISc, Bangalore, India.
  • Sujan Yenuganti, “Performance Enhancement in Stainless steel Pressure Sensor”, in proceedings of International Conference on Modelling, Simulation and Intelligent Computing (MoSICom-2020), January 29-31, 2020, BITS Pilani, Dubai campus, Dubai.
  • Sankalp Paliwal and Sujan Yenuganti, "Experimental analysis and optimal control of PZT based cantilever beam using Fuzzy-PID controllers" in proceedings of 3rd IEEE International conference on Computing, Analytics and Networks (ICAN-2022), November 18-19, 2022, Chitkara University, Punjab, India.
  • Sankalp Paliwal and Sujan Yenuganti, "Implementation of wired and IoT based wireless transmitters for pressure sensors" Accepted for Oral presentation in 2nd OPJU International  Technology conference on Emerging Technologies for Sustainable Development (OTCON 2.0) in January 2023, Raigarh, Chhattisgarh, India.

Quick Links

    An Institution Deemed to be University estd. vide Sec.3 of the UGC Act,1956 under notification # F.12-23/63.U-2 of Jun 18,1964

    © 2024 Centre for Software Development,SDET Unit, BITS-Pilani, India.

    Designed and developed by fractal | ink design studios