Conference Publications
Conference Paper Published: 70.
Some selected conference papers outside India:
1. Suvanjan Bhattacharyya, Arnab Banerjee, Ali Cemal Benim, Rachid Bennacer, “Influence of broken twisted tape on heat transfer performance in novel triangular axial corrugated tubes: experimental and numerical study”, XII International Conference on Computational Heat, Mass and Momentum Transfer” Rome, Italy, 3-6 September, 2019.
2. Suvanjan Bhattacharyya, Ali Cemal Benim, Arnab Banerjee, M.A. Moghimi, “Heat transfer performance and optimization of square ribs on two walls in a solar air-heater duct”, XII International Conference on Computational Heat, Mass and Momentum Transfer” Rome, Italy, 3-6 September, 2019.
3. Suvanjan Bhattacharyya, Arnab Banerjee, Marilize Everts, Kunal Dey, Josua P Meyer, “Thermohydraulic characteristics of transitional flow in a circular tube with inlet disturbances”, 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2019), 22 – 24 July 2019, Wicklow, Ireland.
4. Abubakar I Bashir, Marilize Everts, Suvanjan Bhattacharyya, Josua P Meyer, “Effect of inclination buoyancy on pressure drop in the laminar and transitional flow regimes of smooth circular tube”, 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2019), 22 – 24 July 2019, Wicklow, Ireland.
5. Suvanjan Bhattacharyya, Marilize Everts, Abubakar I Bashir, Josua P Meyer, “Experimental investigation of the heat transfer characteristics of laminar flow in a vertical circular tube at low Reynolds numbers”, 16th UK Heat Transfer Conference (UKHTC2019), University of Nottingham, UK, September 8-10, 2019.
6. Suvanjan Bhattacharyya, Arnab Banerjee, Md. Anisur Rahman, Reeshika Saha, Akshoy Ranjan Paul, “Numerical analysis of heat transfer and flow dynamics in a pipe with square extruded bluff cylinder inserts”, 2nd International Conference on Energy and Power, ICEP2018, 13-15 December 2018, Sydney, Australia.
7. Suvanjan Bhattacharyya, Kunal Dey, Rajdeep Hore, Arnab Banerjee, Akshoy Ranjan Paul, “Computational study on thermal energy around diamond shaped cylinder at varying inlet turbulent intensity”, 2nd International Conference on Energy and Power, ICEP2018, 13-15 December 2018, Sydney, Australia.
8. S. Bhattacharyya, H. Chattopadhyay, K. Dey, A. Jhunjhunwala, “Effects of turbulent intensity and position of a tringular bluff cylinder on heat transfer: numerical study”, 4th Thermal and Fluids Engineering Conference (TFEC), April 14 –17, 2019. Las Vegas, NV, USA.
9. Suvanjan Bhattacharyya, Himadri Chattopadhyay, Arnab Banerjee, Ali Cemal Benim, 2018, “Heat Transfer and Fluid Flow Behaviors of a Circular Twisted Channel”, 11th International Conference on Computational Heat, Mass and Momentum Transfer, ICCHMT 2018, Cracow, Poland, 21-24 May 2018.
10. Suvanjan Bhattacharyya, H. Chattopadhyay, S. Show, “Interactions between Heat Transfer and Flow Field in a Square Channel with Triangular Prism”, 3rd Thermal and Fluids Engineering Conference (TFEC), March 4 –7, 2018, Fort Lauderdale, FL, USA.
11. Suvanjan Bhattacharyya, JP Meyer, A. Sarkar, S. Das, “Experimental Study on Heat Transfer Enhancement Characteristics Of Duct Inserted With Short Length Angular Cut Twisted Tape, International Conference on Thermal and Fluid Engineering: ICFT- 2017, 3 – 5 JULY 2017, Thailand.
12. Suvanjan Bhattacharyya, Himadri Chattopadhyay, A. C. Benim, “Novel Design of V-shape Winglet Turbulator For Heat Transfer Enhancement in a Solar Air heater”, 10th International Conference on Computational Heat, Mass and Momentum Transfer, ICCHM2T, Seoul, South Korea, 28th May, 2017 – 1st June, 2017.
13. Suvanjan Bhattacharyya, Himadri Chattopadhyay, Ali Cemal Benim, “Heat Transfer Enhancement Of Laminar Flow Of Ethylene Glycol Through A Square Channel Fitted With Angular Cut Wavy Strip”, ICCHMT 2016, Cracow, Poland, 23-26 May 2016.
14. Suvanjan Bhattacharyya, Himadri Chattopadhyay, “Computational of Studies of Heat Transfer Enhancement in Turbulent Channel Flow with Twisted Strip Inserts”, Proceedings of CHT-15, ICHMT International Symposium on Advances in Computational Heat Transfer, May 25-29, 2015, Rutgers University, Piscataway, USA.
Some selected conference papers in India:
15. Suvanjan Bhattacharyya, Md Anisur Rahman, Rajat Subhra Bhowmik, Ranjib Biswas, “Experimental investigation of heat transfer performance and entropy generation in a helical corrugated solar air heater duct with matrix roughness, 11th International Exergy, Energy and Environment Symposium (IEEES-11), July14-18, 2019, Chennai, India.
16. Suvanjan Bhattacharyya, Sampad Gobinda Das, Kunal Dey, Himadri Chattopadhyay, “Thermohydraulic Performance and Optimization of Convex Dimples Microchannel under Pulsating Inlet Flow Condition”, 11th International Exergy, Energy and Environment Symposium (IEEES-11), July14-18, 2019, Chennai, India.
17. Suvanjan Bhattacharyya, Arnab Banerjee, Aakash Jhunjhunwala, Rishav Sarkar, Amitava Mitra, The influence of wire-coil inserts on the heat transfer and pressure drop of a helically corrugated tube: Experimental study, 11th International Exergy, Energy and Environment Symposium (IEEES-11), July14-18, 2019, Chennai, India.
18. Smapad Gobinda Das, Suvanjan Bhattacharyya, Himadri Chattopadhyay, Arnab Banerjee, “Thermohydraulic characteristics of regularly spaced square twisted micro-channel Under Pulsating Inlet Flow Condition”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
19. Suvanjan Bhattacharyya, Md. Anisur Rahman, Aakash Jhunjhunwala, Ranjib Biswas, Akshoy Ranjan Paul, “Transport phenomenon over array of diamond cylinders with varying inlet turbulent intensity”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
20. Suvanjan Bhattacharyya, Rishav Modi, Kunal Dey, Md Anisur Rahman, Manabendra Pathak, “Heat transfer and flow characteristics of circular channels with mixed ribs configuration”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
21. Suvanjan Bhattacharyya, Kunal Dey, M.A. Moghimi, Md Anisur Rahman, Hardik Kothadia, “3D numerical analysis and optimization of heat transfer augmentation over rhombus cylinder with different orientation”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
22. Suvanjan Bhattacharyya, Arnab Banerjee, Himadri Chattopadhyay, Marilize Everts, Josua P Meyer, “The influence of circular bluff body at inlet of the circular tube on thermohydraulic characteristics in the transitional flow regime”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
23. M.A. Moghimi, Suvanjan Bhattacharyya, G. Ahmadi, A. C. Benim, “Numerical analysis of porous wind barrier for minimizing collector mirror soiling in a parabolic trough collector plant”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
24. Hardik Kothadia, Suvanjan Bhattacharyya, S. V. Prabhu, “Effect of Orientation on Flow Boiling Process in Helical Coils”, 25thNational and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), 28-31 December 2019, India.
25. Suvanjan Bhattacharyya, H. Chattopadhyay, S. G. Das, A. Banerjee, “Heat Transfer and Fluid Flow behaviours of a Square Twisted Micro-Channel”, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), December 10-12, 2018, IIT Bombay, Mumbai, India.
26. Suvanjan Bhattacharyya, K. Dey, Md A. Rahman, R. Bennacer, “Influence of turbulence intensity at inlet on the fluid flow and heat transfer around square and circular cylinder”, Proceedings of the 7th International and 45th National Conference on Fluid Mechanics and Fluid Power (FMFP), December 10-12, 2018, IIT Bombay, Mumbai, India.
27. Suvanjan Bhattacharyya, H. Chattopadhyay, A. Guin, A. Banerjee, “3D computational study of fluid flow and heat transfer in a dimple enhancer channel”, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), 27-30 December 2017, Hyderabad, India.
28. Suvanjan Bhattacharyya, P. Das, A. Haldar, “Perfomance analysis of a geothermal air conditioner using nanofluid”, International Conference on Nano for Energy and Water & Indo French Workshop on Water Networking, February 22-24, 2017, University of Petroleum and Energy Studies (UPES), Dehradun, India.
29. Suvanjan Bhattacharyya, H. Chattopadhyay, A. Guin, “Numerical Investigation of Heat Transfer and Flow Characteristics of Cu/Water Nanofluid in a Wavy Ribbed Channel”, International Conference on Nano for Energy and Water & Indo French Workshop on Water Networking, February 22-24, 2017, University of Petroleum and Energy Studies (UPES), Dehradun, India.
30. Suvanjan Bhattacharyya, S. Agarwal, R. Das, S. Das, A. Sarkar, “A numerical study of three dimensional flows past a bluff body for AL2O3-H2O solution”, International Conference on Nano for Energy and Water & Indo French Workshop on Water Networking, February 22-24, 2017, University of Petroleum and Energy Studies (UPES), Dehradun, India.
31. Suvanjan Bhattacharyya, Himadri Chattopadhyay, “3D CFD Simulation on Heat Transfer Enhancement in Turbulent Channel Flow with Wavy Tape Inserts at Different Entrance Angle”, Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, December 15-17, 2016, MNNITA, Allahabad, U.P., India.
32. Suvanjan Bhattacharyya, Himadri Chattopadhyay, et al., “Thermohydraulic Transport Characteristics of Micro Mixer in Micro Channel”, Recent Advances in Chemical Engineering - Proceedings of ICACE, NITK Surathkal, Part I, Book Chapter – Springer Singapore, 2016, pp - pp 29-39. DOI - 10.1007/978-981-10-1633-2_4
33. Suvanjan Bhattacharyya, Anirban Roy, Himadri Chattopadhyay, Aritra Rakshit, “A Numerical Investigation Based on Heat Transfer and Fluid Flow Characteristics of Air in a Circular Tube Heat Exchanger with Inclined Ribs”, Recent Advances in Chemical Engineering - Proceedings of ICACE, NITK Surathkal, Part I, Book Chapter – Springer Singapore, 2016, pp - pp 11-20. DOI - 10.1007/978-981-10-1633-2_2.
34. Suvanjan Bhattacharyya, Himadri Chattopadhyayay, Anindya Guin, “Enhancement of Heat Transfer through Ribbed Wavy Channel”, National Conference on Advances in Thermal Engineering (NCATE2016), Jadavpur University, 23 -24 September 2016.
35. Suvanjan Bhattacharyya, Himadri Chattopadhyay, Nayan Biswas, Aritra Rakshit, Anirban Roy, “Numerical Simulation of The Turbulent Air Flow in the Narrow Circular Channel with Centre-Cleared Rib Vortex Generator”, ICCMS2016, IIT Bombay, Mumbai, India, June 27-July 1, 2016.
36. Suvanjan Bhattacharyya, Sumanta Laha, Satyaki Basu, Sampad Gobinda Das, Himadri Chattopadhyay, “Thermohydraulic Transport Characteristics of Inclined Ribs in Micro Channel”, ICCMS2016, IIT Bombay, Mumbai, India, June 27-July 1, 2016.
37. Suvanjan Bhattacharyya, Himadri Chattopadhyay, Tarun Kanti Pal, Anirban Roy, “Numerical Investigation of Thermohydraulics Performance in Elliptical Twisted Duct Heat Exchanger”, 28th International Conference on CAD-CAM, Robotics and Factories of the Future 2016 , January 6 – 8, 2016, Kolaghat, West Bengal. India. (Springer, Scopus Index)