1.    A. K. Seriyala, A. Rao, C. Leclerc, S. Appari, B. Roy, “Effects of metal loading and support modification on the low-temperature steam reforming of ethanol (LTSRE) over the Ni–Sn/CeO2 catalysts”, Int J Hydrogen Energ.  https://doi.org/10.1016/j.ijhydene.2023.01.039

2.    I. Priyadarshini, A. Chowdhury, A. Rao, B. Roy, P. Chattopadhyay, “Assessment of bimetallic Zn/Fe0 nanoparticles stabilized Tween-80 and rhamnolipid foams for the remediation of diesel contaminated clay soil”, J Environ Manage 325, 116596 (2023).

3.    R. Chava, A. V. D Bhaskar, B. Roy, S. Appari, “Recent advances and perspectives of perovskite-derived Ni-based catalysts for CO₂ reforming of biogas”, J CO2 UTIL, 65, 102206 (2022).

4.    Anil S, Indraja S, Singh R, Appari S, Roy B, “ A review on ethanol steam reforming for hydrogen production over Ni/Al₂O₃ and Ni/CeO₂ based catalyst powders”, Int J Hydrogen Energ 47, 8177–213 (2022).

5.    Sharma S, Yashwanth PK, Roy B, “Deactivation study of the BICOVOX catalysts used in low temperature steam reforming of ethanol for H₂ production”, J Phys Chem Solids,156,110138 (2021). 

6.    Rama Krishna Chava, Srinivas Appri, B. Roy, “Effect of Calcination Time on the Catalytic Activity of Ni/g-Al₂O₃ Cordierite Monolith for Dry Reforming of Biogas”, Int J Hydrogen Energ 38, 16121–32 (2020). 

7.    Sharma S, Aich S, Roy B, “Low temperature steam reforming of ethanol over cobalt doped bismuth vanadate [Bi₄(V_0.90Co_0.10)₂O_11-δ (BICOVOX)] catalysts for hydrogen production”, J Phys Chem Solids 148, 109754 (2021).

8.    Singh V, Rao A, Tiwari A, Yashwanth P, Lal M, Dubey U, Aich S, Roy B, “Study on the effects of Cl and F doping in TiO₂ powder synthesized by a sol- gel route for biomedical applications”, J Phys Chem Solids 134, 262–72 (2019). 

9.    Karthick A, Roy B, Chattopadhyay P, “A review on the application of chemical surfactant and surfactant foam for remediation of petroleum oil contaminated soil”, J Environ Manage 243, 187–205 (2019). 

10. Karthick A, Roy B, Chattopadhyay P, “Comparison of zero-valent iron and iron oxide nanoparticle stabilized alkyl polyglucoside phosphate foams for remediation of diesel-contaminated soils”, J Environ Manage 240, 93–107 (2019). 

11. Sharma S, Patil B, Pathak A, Ghosalkar S, Mohanta HK, Roy B, “Application of BICOVOX catalyst for hydrogen production from ethanol”, Clean Technol Environ Policy 20, 695–701 (2018). 

12. Rao A, Pundir VS, Tiwari A, Padarthi Y, Rao NVM, Aich S, Roy B, “Investigating the effect of dopant type and concentration on TiO₂ powder microstructure via rietveld analysis”, J Phys Chem Solids 113, 164–76 (2018). 

13. Patil B, Sharma S, Mohanta HK, Roy B, “BINIVOX catalyst for hydrogen production from ethanol by low temperature steam reforming (LTSR)”, J Chem Sci 129, 1741–6 (2017). 

14. Chopra P, Ghosh A, Roy B, Ghanty TK, “Theoretical prediction of noble gas inserted halocarbenes : FNgCX ( Ng = Kr, and Xe ; X = F, Cl, Br, and I )”, Chem Phys 494, 20–30 (2017). 

15. Singh B, Ghosh S, Aich S, Roy B, “Low temperature solid oxide electrolytes (LT-SOE): A review”, J Power Sources 339,103–35 (2017). 

16. Aich S, Mishra MK, Sekhar C, Satapathy D, Roy B, “Synthesis of Al-doped Nano Ti-O scaffolds using a hydrothermal route on Titanium foil for biomedical applications”, Mater Lett 178,135–9 (2016). 

17. Roy B, Aich S, “Synthesis of Mixed-Phase TiO₂ Powders in Salt Matrix and Their Photocatalytic Activity”, Mater Manuf Process 31 (12), 1628-1633 (2016). 

18. Roy B, Leclerc CA, “Study of preparation method and oxidization/reduction effect on the performance of nickel-cerium oxide catalysts for aqueous-phase reforming of ethanol”, J Power Sources 299, 114–24 (2015). 

19. Sekhar C, Roy B, Aich S, “Synthesis of nanoscale oxide scaffold on Nitinol surface using hydrothermal treatment”, Surf Eng 31, 747-51 (2015). 

20. Vashishtha S, Manglani GN, Roy B, “Development of Ni-Sn/Al₂O₃ Nano Catalyst Powders Using Solution Combustion Synthesis for H 2 Production from Biomass by Aqueous Phase Reforming”, Adv Sci Lett 20, 304–5 (2014).

21. Roy B, Sullivan H, Leclerc CA. “Effect of variable conditions on steam reforming and aqueous phase reforming of n-butanol over Ni/CeO₂ and Ni/Al₂O₃ catalysts”, J Power Sources 267, 280–7 (2014). 

22. Roy B, Artyushkova K, Pham HN, Li L, Datye AK, Leclerc CA, “Effect of preparation method on the performance of the Ni/Al₂O₃ catalysts for aqueous-phase reforming of ethanol : Part II-characterization”, Int J Hydrogen Energ, 37, 18815–26 (2012). 

23. Roy B, Martinez U, Loganathan K, Datye AK, Leclerc CA, “Effect of preparation methods on the performance of Ni/Al₂O₃ catalysts for aqueous-phase reforming of ethanol : Part I-catalytic activity”, Int J Hydrogen Energ, 37, 8143–53 (2012). 

24. Roy B, Fuierer PA, Aich S. “Photovoltaic performance of dye sensitized solar cell based on rutile TiO₂ scaffold electrode prepared by a 2 step bi-layer process using molten salt matrices”, Mater Lett, 65, 2473–5 (2011). 

25. B. Roy, L. Li, and S. Aich, “Effect of salt composition on photovoltaic performance of the dye sensitized solar cells prepared from nano anatase TiO₂ powder using NaCl- Na₂HPO₄.2H₂O salt matrices,” J. Mater. Sci., 46, 7611 (2011).

26. Roy B, Fuierer PA, Aich S, “Synthesis of TiO₂ scaffold by a 2 step bi-layer process using a molten salt synthesis technique”, Powder Technol, 208, 657–62 (2011).

27. B. Roy, H. Sullivan, C.A. Leclerc, “Aqueous-phase reforming of n-BuOH over Ni/Al₂O₃  and Ni/CeO₂  catalysts”, J Power Sources 196 (24), 10652-10657 (2011).

28. Roy B, Loganathan K, Pham HN, Datye AK, Leclerc CA, “Surface modification of solution combustion synthesized Ni/Al₂O₃ catalyst for aqueous-phase reforming of ethanol”, Int J Hydrogen Energ, 35,11700–8 (2010). 

29. Roy B, Fuierer PA, “Influence of Sodium Chloride and Dibasic Sodium Phosphate Salt Matrices on the Anatase–Rutile Phase Transformation and Particle Size of Titanium Dioxide Powder”, J Am Ceram Soc.,  93, 436–44 (2010). 

30. B. Roy and P. A. Fuierer, “Synthesis of Cobalt-doped Bismuth Vanadate by Combustion- Synthesis: Influence of Fuel on Phase Content and Morphology,” J. Mater. Res., 24 (10), 3078 (2009). 

31. B. Roy and P. A. Fuierer, “Molten salt synthesis of Bi₄ (V_0.85 Co_0.15)₂ O_11-d (BICOVOX) ceramic powders,” J. Am. Ceram. Soc.92 [2] 520–23 (2009). 

32. B. Roy, S. P. Ahrenkiel, and P. A. Fuiere , “Controlling the size and morphology of TiO₂ powder by molten- and solid- salt synthesis”, J. Am. Ceram. Soc.91 [8] 2455 (2008). 

33. B. Roy, J.D. Perkins, T. Kaydanova, D.L. Young, M. Taylor, A. Miedaner, C. Curtis, H. -J. Kleebe, D.W. Readey, and D.S. Ginley, “Preparation and characterization of sol-gel derived Cu-Sr-O thin films”, Thin Solid Films, 516, 4093(2008). 

34. B. Roy, A.H. Mahan, Q. Wang, R. Reedy, D.W. Readey, and D.S. Ginley, “Monitoring of crystallization and the effect of the deposition rate, hydrogen content and annealing process on the crystallization of hot wire chemical vapor deposited hydrogenated amorphous silicon (a-Si:H) films”, Thin Solid Films, 516, 6517-23 (2008). 

35. B. Roy, R. C. Reedy, and D. W. Readey, “Two-step annealing of hot wire chemical vapor deposited a-Si:H films”, J Mater Sci: Mater Electron. 19(5), 418 (2008). 

36. A.H. Mahan, B. Roy, R.C. Reedy, Jr., D.W. Readey, and D.S. Ginley, “Rapid thermal annealing of hot wire chemical-vapor-deposited a-Si: H films: the effect of film hydrogen content on the crystallization kinetics, surface morphology and grain growth”, J. Appl. Phys., 99, 023507 (2006). 

37. B. Roy, S.B. Majumder, R.S. Katiyar, “Investigation on the dielectric and polarization behavior of sol-gel derived erbium doped Pb(Zr_0.53Ti_0.47)O₃thin films,” Integr. Ferroelectr, 42, 373 (2002). 

38. B. Roy, S.B. Majumder, R.S. Katiyar, “Investigation on the dielectric and polarization behavior of sol-gel derived erbium doped Pb(Zr_0.53Ti_0.47)O₃thin films,” Integr. Ferroelectr, 42, 373 (2002).

39. S.B. Majumder, B. Roy, R.S. Katiyar, S.B. Krupanidhi, “Effect of neodymium (Nd) doping on the dielectric and ferroelectric characteristics of sol-gel derived lead zirconate titanate (53/47) thin films”, J. Appl. Phys., 90(6), 2975(2001). 

40. S.B. Majumder, S.B. Krupanidhi, B. Roy, and R .S. Katiyar, “Effect of acceptor and donordopants on polarization components of PZT thin films”, Appl. Phys. Lett. 79(2), 239(2001).

41. S.B. Majumder, P.S. Dobal, B. Roy, S. Bhaskar, R.S. Katiyar, “Effect of rare earth doping on sol-gel derived PZT thin films,” Ferroelectr., Lett. Sect. , 28 (3-4), 85 (2001). 

42. S.B. Majumder, B. Roy, R.S. Katiyar, and S.B. Krupanidhi, “Improvement of the degradation characteristics of sol-gel derived PZT (53/47) thin films: Effect of conventional and graded iron doping,” Integr. Ferroelectr, 39 (1-4), 1077 (2001). 

43. P.S. Dobal, R.R. Das, B. Roy, R.S. Katiyar, S. Jain and D.C. Agrawal, “Raman scattering and X-ray diffraction studies of rare earth doped Pb_0.9 La_0.1TiO₃ thin films prepared by sol-gel method”, J. Raman Spectrosc. 31, 965 (2000).

44. S.B. Majumder, B. Roy, D.C. Agrawal and Y. N. Mohapatra, “Phase transformations in sol-gel prepared PZT and PLT thin films upon isothermal treatments at different temperatures”, Ferroelectrics, 225, 271 (1999). 

Method of Producing a Bismuth Vanadium Oxide Derivative of Bi₄ V₂ O_11-δ Using Molten Salt Synthesis, and Product Produced, Banasri Roy, Patent Application No: US 2011/0198530 A1